Pressed Copper Stamped Parts
Pressed Copper Stamped Parts are precision metal parts manufactured through stamping technology using high-purity copper as raw material. Red copper, with its copper content of over 99.5%, has excellent electrical conductivity, thermal conductivity and good plasticity, which makes red copper stamping parts widely used in many fields.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Product Profile
Pressed Copper Stamped Parts can quickly conduct heat away, effectively reduce the operating temperature of the equipment and extend the service life of the equipment. At the same time, red copper has good corrosion resistance, can maintain stable performance in general atmospheric environments and some chemical media, and is not easy to rust and damage, which greatly improves the reliability and durability of the product.
solve problems
solve problems
Insufficient conductivity
The purity of the raw material copper used in Stamping Copper Sheet is ≥99.9%, and its conductivity is increased by 20%, reducing energy loss.
Easy to fail under high temperature conditions
Custom Copper Stamping can withstand high temperature coatings of 200℃, and its anti-aging performance is improved by 50%.
Difficult to adapt to complex structures
In the manufacturing process of Copper Sheet Stamping, 0.01mm level precision stamping is used to support special-shaped/thin-wall (0.1mm) customization.
Environmental compliance pressure
Full-process certificate of conformity certification, focusing on the manufacturing of perfect products.
Customization
| Application Areas | Pain Points | Solution |
| Power Battery Field | The battery core connecting piece is prone to heat and the welding yield is low. |
The one-piece Busbar reduces solder joints and reduces internal resistance by 10%.
Pre-nickel plating, compatible with laser welding process, and the yield rate is increased to 99.5%. |
| Photovoltaic And Energy Storage Systems | Corrosion in outdoor environments causes component failure. |
Tin-plated copper terminals pass 1000h salt spray test and extend life by 8+ years.
Modular assembly design increases installation efficiency by 30%. |
| New Energy Vehicles | High-voltage connectors are heavy and take up a lot of space. |
Lightweight hollow structure (15% weight reduction), supports 800V high-voltage platform.
Embedded heat sink design reduces temperature rise by 12°C. |
technological breakthrough
Conductivity
Stamping Copper Sheet adopts vacuum melting + cold rolling process, with a purity of 99.95%
Durability
Custom Copper Stamping using nano-scale micro-hole plating, the bonding strength is increased by 3 times
Production Efficiency
Multi-station continuous mold, high production efficiency.
Cost Control
Intelligent discharge system, scrap rate of Copper Sheet Stamping is ≤2%
feedback
Customer Feedback Pressed Copper Stamped Parts excels in performance, design and quality. I believe that with the joint efforts of the team, the product will surely achieve better market performance.
Copper stamping parts are widely used in many fields such as electronics and electrical, machinery manufacturing, and architectural decoration. In the electronic and electrical industry, it is an important material for manufacturing key components such as wire and cable joints, switch contacts, and transformer windings. For example, the use of copper stamping parts for circuit board connection terminals in electronic products such as mobile phones and computers can ensure stable signal transmission and improve product performance and reliability.
Hot Tags: pressed copper stamped parts, China, manufacturers, suppliers, factory, Fusible Link Outer End Cap And Terminal, Automotive Fuse Terminals, Fuse Link Contact For Communications, T2 Copper End Caps For EV Fuse, Fuse Copper Knife, Fuse Copper Outer End Cap Without Hole
