Copper Slip Cap Fitting For Quick Fuse

Chemical composition of Copper Slip Cap Fitting for Quick Fuse:

Copper + Silver Cu + Ag: 99.90

Bismuth Bi: 0.001

Beryllium Sb: 0.002

Arsenic As: 0.002

Iron Fe: 0.005

Lead Pb: 0.005

Sulfur S: 0.005

Mechanical properties of T2 copper of Copper Outer Cap:

Density g/cm³: 8.9

delivery status:

(1)The copper plate which can be made Copper Slip Cap is in the (R) state, the thickness is 4-14mm, the tensile strength is Rm/Mpa (≥195) and the elongation after breaking is % (≥30); it is delivered in the shape of (M, Y1, Y2, Y, T), Thickness 0.3-10mm, tensile strength Rm/Mpa (≥205-350), elongation after break % (≥8-30), hardness HV: 60-120.

(2)Copper strip of Copper Slip Cap Fitting in (M, Y4, Y2, Y, T) state, thickness ≥0.2mm, tensile strength Rm/Mpa (≥195-350), elongation after break % (≥3-30), hardness HV: 60-120.

3.The application of red copper of Copper Outer Cap: 

Red Copper End Plate has excellent electrical conductivity, good thermal conductivity, good corrosion resistance and processing performance, and Copper End Caps Round can be welded and brazed. T2 copper of Copper End Cap Solder Fittings is mainly used as electrical, thermal and corrosion-resistant components.

QUALITY GUARANTEE

Our end caps and fuse terminals meet the highest quality requirements as stipulated in ISO9001, IATF16949, SGS guidelines and our stringent quality control system.

Hot Tags: copper slip cap fitting for quick fuse, China, manufacturers, suppliers, factory, Copper Pipe End Cap And Fuze Terminal, Fusible End Cap And Contact For New Energy Car, Fuse Holder Cap, Fuse Contact Knife Cap For Electric Vehicle, Contact Fuse Links Assembly, Fuse Contact Welded Components