Copper Pipe End Cap For Fast-acting Fuses
Model Number:ASWT-F082
Material:Copper
Application:EV/PV/NH Fuse link
MOQ:1000pcs
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Product Name | Copper Pipe End Cap for Fast-acting fuses |
Model No | ASWT-F082 |
Dimensions | OEM/ODM as your drawing |
Material | 99.99% Red Copper T2Y2,%IACS≥97,HV:80~110s; |
Packing | Plastic inside and carton/pallet outside |
Certifications | ISO9001,IATF16949,RoHS,Reach,etc. |
Orders | MOQ 1,000pcs/item,made by stamping die, lead time 20-30days(die&products). |
Shipping Methods | By Air/Sea/Train,Express(DHL/UPS/TNT/FEDEX,etc) |
Payment Items | 30% deposit and balance before shipment by Bank T/T or L/C at sight. |
1,The selected material has a low melting point and high conductivity and free from deterioration.
2,Degrease the parts before welding, then riveting and welding. There is a stable control process for welding temperature and time to ensure that the outer cap and contact blade are not annealed, and the welding pullout force reaches 20 NM.
3,Matte tin plating is more resistant to high temperatures.
QUALITY GUARANTEE
Copper Pipe Cap For Fast-acting Fuses are according to ISO9001, IATF16949, SGS guidelines ,ROHS directive. Shippment inspection for pipe caps are :
1,Welding pull-off test
The copper cap should be riveted firmly, to ensure that when the fuse link is not damaged，the copper cap cannot be detached. After immersing the sample in water at 15℃-35℃ for 24 hours and taking it out, On each end cap, apply tension evenly to 5N, Hold for 1 minute, the copper cap should not fall off.
2,Tensile test
One end copper cap fixing the fuse, then on the other end of the copper cap, apply a tension of 100N along the horizontal axis, The copper caps at both ends should not be loose and the pipe body should not be broken.
3,Tube strength test
After fixing the copper caps at both ends, apply a pressure of 200N to the center of the ceramic tube, the tube should not be broken.
Copper Pipe End Cap For Fast-acting Fuses packaged as delivered can be stored for one year from the date indicated on the packing label under the following conditions:
1）Temperature:-15 °C- +30°C (no condensation)
2）Humidity :85% RH or less
3）Not exposed to corrosive gas or sea breeze
4）No visible dust
5)Not exposed to direct sunlight
6)Load:No application of load that may cause deformation or degradation of the product.
Mr.Terry Young (Senior Sales Engineer)
Xiamen Apollo Stamping Welding Technology Co., Ltd
Apollo Electronic Components（Xiamen）Co.,Ltd
Add: No.22-1,Xingqian Road,Jimei District,Xiamen,Fujian,China,361022
Tel&Fax: 0592-5765084, Mob/WhatsApp/WeChat: 0086-13859903038 ,QQ: 1260358661
Email: terry@stamping-welding.com ,Web: www.stamping-welding.com , www.china-electronic-components.com
Since2010,professional in EV BusBar&Laminated Busbar, EV&PV Fuses Contact&Cap, Power Battery Aluminum Shells, Power Capacitor Steel&Aluminum Cans etc Stamping&Welding solutions !
Hot Tags: copper pipe end cap for fast-acting fuses, China, manufacturers, suppliers, factory, Pipe End Cap Wind Power Converter, Caps For Fuse Holders, Fuse Copper Outer End Cap Without Hole, Outer Cap For New Energy Electric Vehicle Fuse, T2 Copper End Caps For EV Fuse
