Modular Battery Storage
Modular battery storage are highly integrated and standardized energy storage devices developed for new energy grid connection, industrial and commercial peak-valley arbitrage, off-grid backup, and microgrid systems. Breaking away from the traditional decentralized assembly model of energy storage equipment, the product deeply integrates lithium iron phosphate/ternary lithium battery packs, BMS battery management system, PCS bidirectional energy conversion system, electrical relay protection, intelligent temperature control, fire alarm linkage, and data acquisition terminals into an integrated cabinet structure, forming an integrated closed-loop unit of "energy storage-conversion-protection-operation and maintenance".
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
This Modular battery storage adopts a layered modular architecture, divided into two main forms: single-cabinet integrated power units and containerized large-scale integrated systems. It can achieve independent deployment of a single cabinet and parallel expansion of multiple cabinets, catering to the needs of both small-scale distributed power support and large-scale grid-level power support projects. From an engineering perspective, the product fundamentally addresses common industry pain points such as cumbersome on-site construction, poor system adaptability, decentralized operation and maintenance, insufficient operational stability, and low consistency in batch delivery. It is a standardized, modular, and traceable core power carrier equipment in the fields of power electronics and new energy power support.
Core parameters
| Capacity Specifications | 1MWh-10MWh (Large-scale integrated customization) |
| Charge/Discharge Efficiency | 84%-93% (High efficiency and stability for integrated systems) |
| Operating Temperature Range | -30℃~55℃ (Intelligent temperature control across the entire range) |
| Protection Rating | IP65 |
| Cell Cycle Life | Synchronizing cell life standards, intelligent balancing extends life and improves efficiency |
Product Advantages
Flexible Deployment and Strong Adaptability
The modular design makes the Battery energy storage compact and lightweight, suitable for installation in common indoor and outdoor scenarios. The containerized, integrated prefabricated structure supports hoisting, transportation, and rapid deployment, fully meeting the rapid deployment needs of emergency sites, remote projects, and temporary works.
01
High-Efficiency Energy Storage and Consumption Reduction
Equipped with a high-performance bidirectional PCS system, the
Home Energy Storage System achieves efficient AC/DC conversion and low charging/discharging losses. It can dynamically match load scheduling, adapting to peak-valley arbitrage, renewable energy consumption, and grid voltage stabilization scenarios, effectively improving energy utilization and reducing project operating costs.
02
Intelligent Unmanned Operation and Maintenance
Relying on the BMS full-domain monitoring system, the equipment can collect core cell operating data around the clock. The Wall Mounted Energy Storage supports remote monitoring, fault prediction, automatic early warning, and proactive protection, significantly reducing manual maintenance input, avoiding inspection risks, and ensuring long-term stable system operation.
03
Multi-level closed-loop safety protection
Integrates a full range of electrical protections including overcharge, over-discharge, short circuit, leakage, and over-temperature protection. It can quickly isolate faulty circuits and is equipped with an intelligent fire-fighting linkage mechanism to effectively prevent battery thermal runaway risks, fully complying with the safety acceptance standards for power storage projects.
04
All-condition environmental adaptability
Relying on a high-protection cabinet and intelligent constant temperature system, the equipment is resistant to high and low temperatures, moisture and dust, and salt spray. The graded protection models are adaptable to both normal indoor and harsh outdoor operating conditions, effectively reducing the probability of downtime caused by environmental factors for Modular battery storage.
05
Frequently Asked Questions
Q: Does the modular energy storage cabinet support on-demand expansion and parallel operation?
A: Yes. The product adopts a standardized modular interface, allowing for independent operation of a single cabinet or parallel stacking of multiple cabinets for capacity expansion. It adapts to phased project construction and subsequent capacity upgrades, and is compatible with the integration and modification of old and new systems.
Q: How are the actual charge/discharge efficiency and cycle life of the energy storage system guaranteed?
A: Relying on precise BMS equalization control and a comprehensive thermal management system, it effectively reduces cell temperature differences and attenuation losses. The equipment maintains a stable charge/discharge efficiency of 85%-95% under normal operating conditions, and the cell cycle life can reach 2000-6000 cycles, significantly extending the overall service life of the system.
Q: Does the equipment have comprehensive safety protection and fire-fighting mechanisms?
A: It has a fully closed-loop safety system. It integrates electrical protection against overcharge, over-discharge, short circuit, leakage, and over-temperature, coupled with an active fire-fighting linkage system, which can quickly isolate faults and prevent battery thermal runaway, meeting the acceptance standards for power storage projects.
Q: Does the entire unit support remote monitoring and unmanned operation and maintenance?
A: Supported. Equipped with a BMS+EMS full-domain monitoring system, it can monitor the battery cells, temperature, load, and operating status in real time 24 hours a day, and supports remote early warning, fault tracing, and parameter adjustment, effectively reducing on-site operation and maintenance costs.
Contact Us
For Modular battery storage condition assessment, solution customization, prototype testing, and batch engineering integration, please contact our technical team at any time to obtain a one-on-one customized engineering solution.
Hot Tags: modular battery storage, China, manufacturers, suppliers, factory
No Information
