Brass Metal Stamping Parts

Brass stamping is a workpiece that is obtained by applying external force to brass sheets through presses and dies to cause plastic deformation or separation, thereby obtaining the required shape and size. This processing method is widely used in modern industrial production, especially in mass production. With its unique physical and chemical properties, it plays an important role in many industries and has broad development prospects in the future.

Chemical composition: Brass is mainly composed of copper and zinc, with excellent corrosion resistance, good mechanical properties, and processability.
Physical properties: Brass has better thermal and electrical conductivity than many other metals, and has moderate hardness and strength.

 

Stamping process

• Design: According to customer needs, precise stamping dies are designed.
• Material preparation: Select high-quality brass materials to ensure product performance and durability.
• Stamping forming: Use advanced stamping equipment to accurately control the stamping force and speed to achieve product forming.

 

Post-processing

• Cleaning: Remove oil stains and impurities generated during the stamping process.
• Heat treatment: According to the requirements of brass metal stamping parts, annealing or quenching is carried out to improve the mechanical properties of the material.
• Surface treatment: Including polishing, plating, etc., to improve the corrosion resistance and aesthetics of the product.

 

 

 

1. Stamping has high production efficiency, is easy to operate, and is easy to mechanize and automate. This is because stamping relies on stamping dies and stamping equipment to complete the processing. The stroke frequency of ordinary presses can reach dozens of times per minute, and high-speed presses can reach hundreds or even thousands of times per minute, and each stamping stroke may produce a stamped part.

2. During stamping, the die ensures the size and shape accuracy of the stamped part and generally does not damage the surface quality of the stamped part. The life of the die is generally long, so the stamping quality is stable, the interchangeability is good, and it has exactly the same characteristics.

3. Stamping can produce parts with a large size range and complex shapes, such as small stopwatches for clocks and watches, large longitudinal beams and covers for automobiles, etc., and the cold deformation hardening effect of the material during stamping makes the strength and stiffness of the stamping high.

4. Stamping generally does not generate chips and fragments, consumes less material, and does not require other heating equipment. Therefore, it is a material-saving and energy-saving processing method, and the cost of stamped parts is low.